BareSpot Ureabor herbicide can’t be applied using a spoon, a backpack spreader with pump feed, or a backpack spreader with gravity-feed. This product is not to be used around homes or recreational areas.
BareSpot Ureabor can be used around children and pets, provided it is applied in accordance with the instructions on the label. Wear the correct personal protective equipment when using this product.
Keep reading to find out more!
How Do I Describe the BareSpot Ureabor Herbicide?
BareSpot Ureabor, a non-selective residual herbicide, is easy to use and eliminates even the most stubborn annual and perennial grasses and weeds in a single application.
The pelleted product is to be used with caution as it will eliminate all vegetation in its immediate vicinity for a period of up to a year.
BareSpot Ureabor contains three active ingredients: sodium metaborate (49.0%), sodium chlorate (30.0%), and bromacil (1.5%).
Sodium metaborate is a long-term residual herbicide that controls vegetation. It does this by reducing the effectiveness of microorganisms in the turf, and thus stopping them from breaking down BareSpot Ureabor.
Sodium chlorate burns the vegetation quickly until its stems and leaves curl. BareSpot Ureabor’s third active ingredient, bromacil, allows it to easily break down into the soil and effectively control deep-rooted annual and perennial grasses and weeds.
After being absorbed by the roots of the plant, it works to destroy the root system and foliage of weeds. The residual barrier in the soil will continue to be active and control weeds that are germinating.
BareSpot ureabor is an excellent herbicide for areas with long growing seasons and soils rich in organic matter.
Read also: How To Use Gly Pho-Sel Pro Dry 75 SG Herbicide
How To Use BareSpot Ureabor Herbicide?
-
Do Your Calculations:
Multiply the length by width (length X wide = square footage). Divide the square footage by 43,560 to get the acreage (square footage divided by 43,560 equals an acre).
Use between 1 and 1.5 pounds. For annual weed and grasses applications, apply 1 to 1.5 lbs. For annual applications of weeds and grasses, apply 1.8 lbs.
Apply 1.8 pounds for perennial grasses and weeds. Use 1.8 lbs. ft. This product may only be used once per calendar year, and the maximum weight is 1.8 pounds. Per 100 sq. ft.
-
Follow The BareSpot Ureabor Herbicide Label Instructions:
Fill the BareSpot Ureabor into your spreader according to the manufacturer’s instructions. You can test the spreader settings if you are unsure of which one to use.
The pavement is 100 sq. To avoid damaging your lawn, you should not apply this product to turf. You want to apply 1 lb. You want to apply 1 lb. Adjust your settings until you reach this rate.
-
Apply:
Start broadcasting BareSpot ureabor at the edge and continue walking around the perimeter at a steady speed. Walk back and forth to cover the area in the middle.
To avoid a runoff, water the lawn only an inch deep to activate the product and prevent unnecessary runoff.
Read also: How To Use Triumph 22K Picloram Herbicide
According to the BareSpot Ureabor Herbicide Label Where Can I Apply?
- Bleachers
- Bridge abutments
- Buildings
- Bunkers
- Buried cable closures
- Catwalks
- Compresor stations
- Cooling towers
- Cross connect boxes
- Electrical generators
- Fence lines
- Fire hydrants
- Plugs or walls
- Fuel tanks
- Generating plants
- Guardrails
- Helo pads
- Highwayand street markers
- Loading stations
- Lumber yards
- Microwave towers
- Oil and gas pipelines
- Oil refineries
- Parking lots
- Pump decks
- Railroad lines and sidings
- Runway lights
- Runways
- Sign posts
- Storage and equipment yards
- Utility poles and substations
- Vacant lots
- Valves and manifolds
- Waste lagoons
When Do I Use the BareSpot Ureabor Herbicide?
Use BareSpot Ureabor one time a year, when grasses and weeds are actively growing. This will usually be the start of spring.
What are the Target Pests of the BareSpot Ureabor Herbicide?
- Sunflower
- Kochia
- Russian thistle
- Pigweed
- Crabgrass
- Downy brome
- Johnson grass
- Bermuda grass
- Dallis grass
- Quack grass
- Canada grass
- Bindweed
- Bluegrass
- Mixed annual and perennial weeds and grasses
Read also: How To Use Gunslinger P+D Herbicide
What Is the Shelf Life According to the BareSpot Ureabor Label?
BareSpot Ureabor can last for up to three years if stored in a warm and dry place, away from moisture and food. BareSpot Ureabor gives results within a few hours of the initial application.
Additional Product Information?
| What are the Active Ingredients? |
|
| What are the Possible Areas of Application? | Outdoors |
| What Is the Chemical Type? | Herbicide |
| Does this Product Have any Usage Restrictions? | No |
| Which Products Can Be Compared To This Product? |
|
| Is It Safe To Use Around Children and Pets? | Yes, it is safe to use around children and pets. |
| What Is Its Formulation? | Pellets |
Where To Buy BareSpot Ureabor Herbicide For Sale?
About The Author
Discover more from Pestclue
Subscribe to get the latest posts to your email.