Alpine WSG | How To Use

The Alpine WSG insecticide is a water-soluble granule with great features such as its application at will. The alpine pesticide can be applied until the complete eradication of pests from the home and does not require any time skipping.

 

How Do I Describe the Alpine WSG Insecticide?

Alpine Wsg
The Alpine WSG

Dinotefuran is the active component in the insecticide known as Alpine WSG (water-soluble granule), which is a broad-spectrum product that does not contain pyrethroids and does not repel insects.

The EPA has determined that dinotefuran poses a reduced threat to human health and has designated it as such.

Because the Alpine WSG Insecticide does not have any restrictions regarding the amount of time that must pass between applications, the product’s label states that it can be applied an unlimited number of times up until the target insects have been eradicated. This is one of the great things about this product.

 

How Does Alpine WSG Work?

  • Do Your Calculations:

Measure the whole area that has to be treated with the Alpine WSG Insecticide to determine how much of the product is required.

To accomplish this, first, determine the length and width of the treatment area in feet, and then multiply those two numbers together to determine the square footage of the area.

You can purchase Alpine WSG Insecticide in either pre-measured packets or as water-soluble granules in a bottle. Both options are available.

In order to treat an area of 1,000 square feet with a concentration of 0.1 percent, Alpine WSG Insecticide should be blended at a rate of 0.35 ounces per gallon of water.

The rate of application for a 0.2 percent dilution is 0.70 ounces per 1,000 square feet, and the rate of application for a 0.3 percent dilution is 1.05 ounces per 1,000 square feet.

 

Read also: Alpine Pt Aerosol | How To Use

 

  • How To Mix Alpine WSG:

About half of the water should be added to the spray tank. After you have completed filling the spray tank with water, proceed to add the correct measured amount of the Insecticide to the water.

After giving the tank a good shake for the duration of the product’s dissolution, you should then proceed to spray it.

  • Apply the Mixture:

  • Outdoors:
  • Around weep holes
  • Door
  • Window frames
  • Eaves
  • Bushes
  • Foliage
  • Directly to wasps nests and anthills

 

  • Indoors:
  • Void areas
  • Under sinks
  • Refrigerators
  • Carpets
  • Upholstered furniture

 

According to the Alpine WSG Label Where Can I Apply?

  • Outdoors:
  • Apartments
  • Campgrounds
  • Cemeteries
  • Clinics
  • Dog kennels
  • Food handling establishments
  • Green belts
  • Homes
  • Hospitals
  • Hotels
  • Mausoleums
  • Mobile homes
  • Motels
  • Food processing plants
  • Nursing homes
  • Resorts
  • Schools
  • Storage buildings
  • Trailers
  • Autos
  • Buses
  • Boats
  • Ships
  • Trains
  • Trucks
  • Planes
  • Utilities
  • Warehouses
  • Commercial
  • Industrial and residential buildings
  • Theme parks
  • Parks
  • Recreational areas
  • Zoos

 

  • Indoors:
  • Cracks and crevices
  • Void areas
  • Moist areas
  • Openings around pipes and sinks
  • Under refrigerators
  • Under vending machines
  • Interiorscapes
  • Across lower doorway frames and window frames
  • Screens
  • Trashcans
  • Ceilings
  • Upper wall surfaces
  • Under sinks
  • In pipe voids
  • Attic venting
  • Rugs
  • Floors
  • Carpets
  • Upholstered furniture
  • Pet beds
  • Pet resting areas

 

Read also: Phantom Insecticide | How To Use

 

When Do I Use the AlpineWSG?

When there is a high level of insect activity, which typically occurs around the springtime, use the Insecticide.

Applying the treatment once per month will ensure that you have uninterrupted protection against pests throughout the entire year.

 

What are the Target Pests of the Alpine Spray (Alphabetically)?

A

  • Ants
  • Argentine Ants
  • Asian Lady Beetles

B

  • Bean Plataspid
  • Bed Bugs
  • Brown Marmorated Stink Bugs

C

  • Carpenter Ants
  • Centipedes
  • Collembola
  • Crickets

E

  • Earwigs

F

  • Fleas

G

  • German Cockroaches

H

  • Harvester Ants
  • House Flies

K

  • Kudzu Bug

M

  • Millipedes
  • Mosquitos

O

  • Odorous House Ants

P

  • Paper Wasps
  • Pillbugs

R

  • Red Imported Fire Ants

S

  • Southern Fire Ants
  • Sowbugs
  • Spiders

Y

  • Yellowjackets

 

How To Mix Alpine WSG?

  • For a 1% mixture, you will use 10 g of Alpine WSG per 1 gallon of water
  • For a 2% mixture, you will use 20 g per gallon of water.
  • For a 3% mixture, you will use 30 g per gallon of water.

 

Read also: Lambdastar Ultracap 9.7 | How To Use

 

How Long Does It Take Alpine WSG For Roaches To Act?

It can take three to four weeks for the Alpine WSG Insecticide to completely get rid of the pest infestation.

 

What Is the Shelf Life of the Alpine WSG Bed Bugs?

This Insecticide has a shelf life of three years if it is kept in a cool, dry place that is protected from heat and open flame.

 

Additional Product Information?

What are the Active Ingredients? 40 % Dinotefuran
What are the Possible Areas of Application? Indoors & Outdoors
What Is the Chemical Type? Inorganic
Does this Product Have any Usage Restrictions? No
Which Other Product Can Be Compared With this Product? Reclaim IT
What Is the Shipping Weight of this Product? 0.03 lbs
Is this Product Safe For Pets? If Used as Directed In the alpine WSG label, This Product Is Safe For Pets.

 

Alpine WSG Insecticide Where To Buy?

About The Author


Discover more from Pestclue

Subscribe to get the latest posts to your email.

Leave a feedback

This site uses Akismet to reduce spam. Learn how your comment data is processed.