The lambdastar ultracap 9.7 is one of the best pest control insecticides as it has long management effects, and if used as stated in the lambdastar ultracap 9.7 label will help eliminate some notable target pests.
How Do I Describe the Lambdastar Ultracap 9.7?
A pesticide with a controlled release that is micro-encapsulated and utilized for the long-term management of insect pests is called LambdaStar UltraCap 9.7.
Microencapsulation is a procedure that aids in the pesticide’s ability to adhere to the surface that it is sprayed, making it a very effective method of long-term pest control.
The LambdaStar UltraCap 9.7 is an upgraded version of the LambdaStar product. It makes use of effective pesticide microcapsules while maintaining the effectiveness of its active ingredient, lambda-cyhalothrin.
How Do I Apply the Lambdastar Ultracap?
-
Do Your Calculations:
Calculating the square footage of the area that has to be treated will tell you how much LambdaStar UltraCap you will need to use.
To accomplish this, first, determine the length and breadth of the area in feet, and then multiply those values together to get the square footage of the area (length times width equals square feet).
A LambdaStar UltraCap treatment can be applied at a rate of either 0.2, 0.4, or 0.8 fluid ounces per gallon of water to treat 1,000 square feet of space, depending on the specific application.
Read also: Drione Dust | How To Use
-
Mix:
After you have added the appropriate quantity of Lambdastar Ultracap based on your calculations, you should fill the remaining space in the spray tank with water until it is half full.
After you have added water to the tank until it is completely full, cap it, then shake it to ensure that the liquid is distributed evenly.
-
Apply the Mixture:
In areas where you have observed pest activity, apply the product in accordance with the guidelines provided on the lambdastar ultracap 9.7 label.
- For perimeter barrier treatments: Spraying an insecticide in a continuous band around the building foundations, spraying it three feet up the structure, and ten feet away from the foundation is recommended.In addition, spray the areas around windows, doors, vents, and any other openings that could be used by insects or rodents to gain access to the building.
- For turf and ornamental spraying: Apply the product all over the area in an even layer, spraying to the point where the surface is wet rather than runoff.
- Indoor applications: Can be manufactured, however, only treatments for cracks and crevices will be available at this time.
According to the Lambdastar Ultracap 9.7 Label Where Can I Apply?
- Around industrial buildings
- Houses
- Apartment buildings
- Laboratories
- Buses
- Greenhouses
- Stores
- Warehouses
- Vessels
- Railcars
- Trucks
- Trailers
- Aircraft
- Schools
- Nursing homes
- Hospitals
- Restaurants
- Hotels
- Livestock
- Poultry housing
- Pet kennels
- Food granaries
- Food grain mills
- Food manufacturing, processing, and servicing establishments
When Do I Use the Lambdastar?
It is advisable to apply LambdaStar UltraCap before there is a high level of insect activity. When it comes to effective preventative control, the best times are often the beginning of spring or the end of fall.
To reduce the likelihood of drift, use the solution only on days with light winds and when there is no chance of precipitation in the near future.
Read also: Blindside Herbicide | How To Use
What are the Target Pests of the Lambdastar Ultracap?
- Ants
- Bed Bugs
- Bees
- Boxelder Bugs
- Carpenter Bees
- Carpet Beetles
- Centipedes
- Cigarette Beetles
- Clover Mites
- Cockroaches
- Confused Flour Beetles
- Crickets
- Earwigs
- Firebrats
- Fleas
- Flies
- Lesser Grain Borers
- Millipedes
- Mosquitoes
- Pillbugs
- Red Flour Beetles
- Rice Weevils
- Sawtoothed Grain Beetles
- Scorpions
- Silverfish
- Sowbugs
- Spiders
- Spider Mites
- Stink Bugs
- Termites
- Ticks
- Wasps
How Do I Mix the Lambdastar Ultracap 9.7?
A treatment of between 800 and 1,600 square feet requires 0.2 fluid ounces or 1 gallon to 5 gallons of water.
0.4 fluid ounces, or 1 gallon to 5 gallons, of water, to treat an area between 800 and 1,600 square feet.
0.8 fluid ounces, or 1 gallon to 5 gallons, of water, to treat an area between 800 and 1,600 square feet. Use between 3.4 and 14 milliliters per one thousand square feet to treat turfgrass for pests.
How Long Does It Take For The Lambdastar To Act?
Insects and other vermin that come into touch will start to perish within five to fifteen minutes.
Read also: Bifen LP Granules | How To Use
What Is the Shelf Life of the Lambdastar Ultracap?
If it is kept in a dry and cool location, LambdaStar UltraCap 9.7 can maintain its effectiveness for up to three years.
Additional Product Information?
| What are the Active Ingredients? | 9.7 % of Lambda-cyhalothrin |
| What are the Possible Areas of Application? | Indoors & Outdoors |
| What Is the Chemical Type? | Pyrethroid |
| Does this Product Have any Usage Restrictions? | No |
| Which Other Product Can Be Compared With this Product? |
|
| What Is the Shipping Weight of this Product? | 1.22 lbs |
| Is this Product Safe For Pets? | If Used as Directed In the Lambdaster Ultracap 9.7 Label, This Product Is Safe For Pets. |
Lambdastar Ultracap 9.7 Where To Buy?
About The Author
