When used in accordance with the directions on the package, Bifen XTS is safe to use around children and pets. Wearing the appropriate personal protection equipment (PPE) is necessary when combining and using this product.
Prior to applying Bifen XTS, read the label carefully and make sure you understand the mixing and application directions. Excessive usage of the substance can have the same negative effects as insufficient use.
Keep reading to discover more usage tips!
Description of the Bifen XTS
Bifen XTS, a bifenthrin-emulsifiable concentrate pesticide, targets termites and a range of other insects. This treatment provides up to 90 days of residual barrier protection and rapid insect death.
This easy-to-use pesticide can be used by DIY homeowners with a hand-held pump sprayer to reach cracks and crevices and treat lesser-sized areas.
Experts can also profit from applying Bifen XTS as a trench treatment to eradicate termites or as a broad-coverage sprayer.
Bifen XTS can be sprayed in most outdoor spaces, even on trees, and kills a wide variety of insects. It is a very useful and adaptable solution against pests that damage wood or lawns.
Read also: How To Use Taurus SC Insecticide
How To Use Bifen XTS
- Follow the Bifen XTS Label Instructions and Apply:
Measure the treatment area’s length and width in feet, then multiply the result to get square footage (length X width). Use the square footage divided by one acre to get the acreage (square footage / 43,560 sq. ft. = acre).
Use a 0.06% dilution for perimeter treatment against other pests, specific regions in structures against insects that infest wood, and control of subterranean termites.
One quart of Bifen XTS should be diluted with 99.75 litres of water to create a ready-to-use 0.06% water dilution.
Use 0.07 to 0.30 fl. oz. of Bifen XTS per 2 gallons of water per 1,000 square feet for grass broadcast treatments.
Dilute 0.26 to 1.28 fl. oz. of Bifen XTS per 10 gallons of water and apply at a rate of 10 gallons per 4,356 square feet for ornamentals and trees. Finish spray in a gallon can cover 435 square feet.
Moisten the grass and decorative foliage on both the top and bottom with the Bifen XTS mixed solution, being careful not to allow runoff.
After application, quickly wet the treated areas with 0.25 to 0.5 inches of water, taking extra care to avoid runoff or puddling.
Give armyworms, cutworms, and sodworms a full day’s rest before watering or cutting them down to get the best control.
Spraying three feet up the structure and a ten-foot wide band on the ground and surrounding plants is required for a perimeter treatment.
To keep hornets, wasps, bees, and yellowjackets under control when insects are sleeping or late in the evening, apply the blended solution.
Apply the mist where the insects might be nesting—in cracks and crevices, shrubs, and holes in the ground.
Fill the gaps and make contact with as many insects as you can. For ongoing control, reapply as necessary on a quarterly (every three months) basis.
Read also: Delta Dust Insecticide: Usage Tips To Note
According to the Bifen XTS Label Where Can I Apply?
- Bath traps
- Cracks and expansion joints
- Utility entry points
- Inside of foundation walls
- Crawl spaces
- Masonry voids
- Rubble walls
- Beside faulty foundation walls
- Around pipes
- Utility lines leading downward from the structure to a well
- Utility lines
- Inside of structures
- Landscape ornamentation
- Insecticidal barrier
- Foliage plants
- Non-bearing fruit
- Nut trees
- Flowers (in hotels, shopping malls, office buildings, residential dwellings, parks, institutional, recreational, athletic fields, and home lawns)
- Structural surfaces (such as windows, doors, and eaves)
When To use the Bifen XTS
Termites should be controlled before to construction, although Bifen XTS can also be used to treat the soil surrounding buildings or residences once termites have been found.
Additionally, it ought to be used as a preventative measure against other pests with labels or as soon as you notice any additional insect activity.
To help ensure that wind or rain does not blow or wash the pesticide off the treatment area, this product must be administered during calm weather conditions when rain is not expected for the next 24 hours.
What are the Target Pests of the Bifen XTS?
- Beet Armyworm
- Black Vine Weevil
- Broad Mites
- Brown Soft Scales
- California Red Scale
- Carpenter Ants
- Chinch Bugs
- Citrus Thrips
- Clover Mites
- Crane Flies
- Dichondra Flea Beetles
- Elm Leaf Beetles
- European Crane Flies
- European Red Mite
- Fall Webworms
- Fire Ants
- Flea Beetles
- Fungus Gnats
- Japanese Beetles
- Lace Bugs Leafhoppers
- Leaf feeding Caterpillars
- Mole Crickets
- Orchid Weevils
- Pecan Leaf Scorch Mite
- Pine Needle Scales
- Plant Bugs (incl. Lygus spp)
- San Jose Scales
- Sod Webworms
- Spider Mites
- Tent Caterpillars
- Tip Moths
- Twig Borers
- Wood-infesting beetles
- Imported Fire Ants
Read also: Where Can I Apply Doxem NXT Insecticide?
What is the Shelf Life According to the Bifen XTS Label?
Bifen XTS can be stored in accordance with the product instructions for a maximum of one to two years. Keep Bifen XTS in its original container and store it somewhere cold and dry.
Additional Product Information?
|What are the Active Ingredients?
|25.1% Of Bifenthrin
|What are the Possible Areas of Application?
|What Is the Chemical Type?
|Does this Product Have any Usage Restrictions?
|Which Products Can Be Compared To This Product?
|Is It Safe To Use Around Children and Pets?
|Yes, it is safe to use around children and pets.
|What Is Its Formulation?
|Emulsifiable Concentrate (EC)
Where To Buy Bifen XTS?
Watch the Explanatory Video on How To Use the Bifen XTS
A backpack sprayer, hose-end sprayer, hand-held pump sprayer, or skid sprayer is required to apply Bifen XTS. A wheelbarrow, bucket, and shovel or trenching hoe are required when applying Bifen XTS as a perimeter trenching treatment.
Rodding and sub-slab injections are two other therapeutic techniques that require the use of masonry bits, drills, and rods.
This product is not permitted to be used in restaurants, feed handling facilities, or other locations where feed is commercially prepared or processed. When the facility is operating or the food is exposed, do not use in serving areas.
Thank you for reading!