How to Get Rid of Chickweed in 3 Easy Steps

Do you know how to get rid of chickweed? Chickweed is an annual winter weed that can be found growing in lawns throughout the US.

This plant forms dense mats choking your grass and stealing nutrients from your turf. In this article, we’ll go over how to identify and get rid of chickweed leaving your lawn to stay green throughout the year. 

 

How Do I Identify Chickweed?

To achieve the best results in any pest control process, they are steps you should begin which save time and cost.

Identifying what exactly you’re dealing with, prevents careless identification that can lead to wrong treatment methods costing you time and money.

Chickweed is a winter annual weed, many homeowners notice patches growing in late winter or early spring in their lawns.

Chickweeds typically grow in patches up to two inches in height. This weed grows pointed opposite leaves and the flowers are small with five white petals that appear split down the middle.

 

Read also: What is Integrated Weed Management?

 

Picture of Chickweed

Below are pictures of chickweed;

How To Get Rid Of Chickweed

How To Get Rid Of Chickweed

 

Read also: Pramitol 5PS Industrial Weed Killer

 

Where Do I Find Chickweed?

Being able to locate hotspots of pest and weed activities is the next phase of any good pest control plan. Once you know what your weeds look like, check around your property to confirm their presence or find hot spots of activity.

Chickweed grows well in areas with poor drainage, look around your property and note areas that are shaded throughout the day or where the soil is compacted after normal rainfall.

Note spots in the turf where puddles form. After identifying your weed and inspecting for activity on your property, it’s time to start treatments.

 

Read also: Glyphosate 4 Plus Weed Killer Concentrate

 

How to Get Rid of Chickweed

When starting any treatment ensure to wear your personal protective equipment and remember to keep all people and pets off the treated areas until dry.

To kill any chickweed on your lawn, use the post-emergent herbicide that’s labeled for chickweed control.

 

1. Eraser Weed Killer

Check out the eraser weed killer. Eraser is a non-selective weed killer made with glyphosate. Glyphosate is a very powerful ingredient. However, it is non-selective meaning, the product will affect and kill any plant.

 

How to use

  • You can apply eraser weed killer with a 1-gallon handheld.
  • The pump sprayer makes 2.5 fluid ounces of product into one gallon of water. This will treat up to 300 square feet of the treatment area.
  • Once you’ve completed your solution, spray any chickweed on your lawn directly with low pressure.
  • Use a fan spray setting to thoroughly coat the leaves and spray to the point of wetness, but not run off.
  • To prevent spray drift, you can block off surrounding areas with cardboard.
  • When you’re done, allow treated areas to dry completely before allowing people or pets back in, you should start to see weeds dying within four to six weeks.

 

2. Pearl Weed Killer

Pearl weed killer won’t just kill chickweed but prevents and prevention is essential to keeping weeds in check. Even after you’ve applied herbicides, the best way to stop weed activity is to make sure it can’t regenerate.

If chickweed is a problem that persists year after year, then consider laying down a pre-emergent herbicide with pearls.

I mean, we recommend you use a product like a pearl weed killer. Pearl is a soluble concentrate of 150 g/l (13.52% w/w) glufosinate-ammonium. It is a fast-acting desiccant herbicide that is used to manage a variety of grasses and broadleaf weeds, particularly difficult weeds like Horse-tail.

 

3. Barricade

Barricade when applied properly, the barricade will form a chemical barrier that will stop weed seeds from sprouting.

It will have no effect on weeds that are already established to prevent chickweed. We recommend you make your application during fall before the soil temperatures cool to below 70 degrees.

 

How to Use

  1. Barricade comes as a granular herbicide so you’ll need a broadcast, push spreader to apply it.
  2. It depends on your turf type, you’ll make an application at the labeled rate of 1.5 to 24 pounds of product per 1,000 square feet.
  3. Broadcast half your granules in parallel lines once across the area.
  4. Then broadcast the other half at a perpendicular angle to cover the area in its entirety.
  5. Once the product is fully applied water ridden the most effective control can be achieved with at least half an inch of water within 14 days of application.

When applied properly, barricades will prevent weeds from emerging on your lawn for the winter season.

 

Finally

Chickweed is a persistent winter weed that can choke out your turf grass, but there are ways to control a weed Invasion that’s gone out of hand.

With these pro products and tips, we believe you now know how to get rid of chickweed and you can stop chickweed from growing in your lawn.

If you like this how-to guide, please share it and keep visiting our website for more DIY pest control tips.

About The Author

Leave a feedback

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Discover more from Pestclue

Subscribe now to keep reading and get access to the full archive.

Continue reading