The Bora-care insecticide is known to last for 2 years if probably handled (stored), and will ward off a termites infestation in your home for a minimum of 90 days. Amazing right? let us tell you more about this product!
How Do I Describe the Bora-care Termite Treatment?
A product called Bora-Care is based on borate salt and is used to treat wood to ward off pests like termites and carpenter ants.
To defend against wood-destroying insects, Bora-Care can be blended and sprayed on the majority of unfinished or raw wood components.
It acts by essentially interfering with the target pests’ metabolic processes so that they are unable to obtain nutrients from the wood they devour and consequently perish from malnutrition.
Additionally, Boracare can be applied on surfaces to stop underground termites from building tubes. It has a long-lasting residual that can guard treated wood against insect infestations for up to 30 years, making it perfect for preventative protection.
Read also: ExciteR Pyrethrin Insecticide | How To Use
How To Use Boracare Termite Treatment?
Do Your Calculation:
All exterior walls, inside walls, and the places you desire to treat should all have their linear feet measured. Most frequently, homes’ walls are framed using 2×4, 2×6, or 2×8 studs.
600 lineal feet of 2×4 studs, 400 lineal feet of 2×6, and 308 lineal feet of 2×8 can all be treated with 1 gallon of diluted Bora-Care. Simply put, a measurement’s length is expressed in linear feet (6 linear feet = 6 total feet).
- You must calculate the square footage by multiplying the length by the breadth in order to treat plywood, side panels, and wood flooring.
- You must combine Bora-Care at a 5:1 ratio for preventative treatments for wood-destroying insects and fungi (5 gallons of water to 1 gallon of Bora-Care).
- Bora-Care should be diluted 1:1 for restorative therapies (1 gallon of water to 1 gallon of Bora-Care).
Follow The Bora-care Termite Treatment Label Instructions and Mix:
Pour Boracare into a bucket of HOT water and stir the thick liquid with a paddle mixer attached to a power drill until it resembles water.
Pour the completed mixture into your sprayer gently after it has been well blended.
Spray the substance evenly over the exposed, unfinished wood. Boracare should be applied until the surfaces are damp but not soggy so as to cause drainage.
Wait at least 48 hours for Boracare to dry before painting, staining, or applying a water-resistant product to surfaces that will be exposed to rain and sunshine.
According to the Boracare Termite Treatment Label Where Can I Apply?
- Public Institutions
- Private Institutions
- Farm Buildings
- Non-Food Areas Of Supermarkets
- Non-Food Areas Of Restaurants
- Non-Food Areas Of Food Processing Plants
- Fence posts
- New wooden siding
- Wooden surfaces
When Do I Use the Boracare Insecticide?
If you have damaged wood in your home as a result of a termite infestation, use Boracare. Boracare should be used in addition to a termiticide to treat the subterranean termite infestation.
What are the Target Pests of the Boracare Insecticide?
- Carpenter ants
- Decay fungi
- Drywood termites
- Formosan termites
- Subterranean termites
- Wood-destroying beetles
Read also: American Brand Permethrin Granules
How Long Does It Take To Act?
Depending on the infestation and whether there is active infestation right now, Boracare can take up to 90 days.
What Is the Shelf Life According to the Label?
When correctly stored in a dry, cool environment, Boracare can last up to two years.
Additional Product Information?
|What are the Active Ingredients?
|40 % Of Disodium Octaborate Tetrahydrate
|What are the Possible Areas of Application?
|Indoors & Outdoors
|What Is the Chemical Type?
|Does this Product Have any Usage Restrictions?
|Which Other Product Can Be Compared With this Product?
|What Is Its Shipping Weight?
|Is This Product Safe For Pets?
|If Used as Directed On the label, This Product Is Safe For Pets.