Unlike the Bora-Care Insecticide, the Tim-bor Professional Insecticide is utilized to protect the wood from pests by forming a surface barrier and does not need to penetrate the wood to treat an already-infested wood. Keep reading to know more!
How Do I Describe the Tim-Bor Professional Insecticide?
Applying Tim-Bor Professional Insecticide to different kinds of hardwood surfaces creates a barrier that guards against fungus and insect damage. The solution is a natural mineral salt that can be used as a liquid spray, dust, or foam.
Tim-Bor is used to coat the surface of the wood with a barrier to effectively prevent pest infestations; it cannot be used to treat wood that has already become afflicted.
Tim-Bor is practically odorless and has a low toxicity rate, therefore it doesn’t offer much of a concern. A fantastic, affordable product to have as part of a strategy to avoid water damage and bugs that destroy wood is Tim-Bor Insecticide.
Read also: How To Use Bora-care Termite Treatment
How To Use Tim-Bor Insecticide?
Do Your Calculation:
Measure the area in feet, then multiply the length by the width to get the square footage. Depending on the kind of treatment procedure you choose, there are different application rates.
- Tim-Bor can be blended in a 10% or 15% solution at a rate of 1.0 lb or 1.5 lb per gallon to cover 1,000 sq. ft. of wood surface area for standard liquid spray applications.
- Use 5 gallons of liquid solution per 1,000 square feet of surface for corrective or preventative treatments.
- For foam applications, add an additional foaming ingredient to your foam sprayer at a rate of 1 to 2 oz per gallon in addition to the 15% 1.5 lb rate per gallon.
Follow The Tim-Bor Professional Insecticide Label Instructions and Mix:
For liquid applications, fill the sprayer tank or bucket with 80% of the necessary water, agitate the water, and then slowly pour the appropriate amount of Tim-Bor into the bucket (based on your calculations).
We advise mixing 1 pound of Tim-Bor with 1 gallon of water for general use. The remaining water should be added to the bucket, and the mixture should continue to be stirred with the drill’s paddle bit until it has dissolved entirely.
Apply Tim-Bor on wooden surfaces by adding the combined solution to the spray tank. Tim-Bor powder should be added to a duster and the top should be sealed for dust applications.
Read also: How to Use Doxem NXT Insecticide
According to the Tim-Bor Professional Insecticide Label Where Can I Apply?
- Building structure frames
- Wooden storage sheds
- Wooden structures that are infested
- In wall voids
- Areas where insects have created galleries
When Do I Use the Tim-Bor Insecticide?
It is most useful to apply it during building so that the wall studs can be treated. It is most efficient when used before moisture or insect damage occurs.
What are the Target Pests of the Tim-Bor Insecticide?
- Bark Beetles
- Carpenter Ants
- Dampwood Termites
- False Powder Post Beetles
- Furniture Beetles
- Longhorn Beetles
- Old House Borers
- Powderpost Beetles
- Subterranean Termites
- Timber Beetles
Read also: Bifen IT Liquid Insecticide | Product Review
How Long Does It Take To Act?
A wood preservative called Timbor Insecticide will kill bugs when they swallow it within a few days.
What Is the Shelf Life According to the Label?
When kept in its original container and kept in a cold, dry storage location, Tim-Bor Insecticide will remain effective forever.
Additional Product Information?
|What are the Active Ingredients?||98 % Of Disodium Octaborate Tetrahydrate|
|What are the Possible Areas of Application?||Indoors & Outdoors|
|What Is the Chemical Type?||Inorganic|
|Does this Product Have any Usage Restrictions?||No|
|Which Other Product Can Be Compared With this Product?||Bora-Care|
|What Is Its Shipping Weight?||1.67 lbs|
|Is This Product Safe For Pets?||If Used as Directed On the label, This Product Is Safe For Pets.|