How To Use Strobe Pro G Fungicide

To apply Strobe Pro G Fungicide you will need to utilize a handheld granular spreader, a push broadcast or rotary spreader, or a push drop spreader in order.

It is possible that a bucket and scale are required in order to accurately measure the amount of product required.

After reading this article, all your queries about this very effective fungicide will become a thing of the past!

 

What Is the Strobe Pro G Fungicide?

Strobe Pro G Fungicide
Picture of the Strobe Pro G Fungicide

The only difference is that it comes in granular form rather than liquid like Strobe Pro Fungicide. It is made up of two different combination spectrum ingredients, which are Azoxystrobin and Propiconazole.

Because it is a systemic fungicide, Strobe Pro G will assist you in achieving effective control of foliar, stem, and root infections. Some examples of these diseases include dollar spots, leaf spots, turf mold, and others.

Due to the fact that Strobe Pro G is a granular fungicide, it is simple to administer and does not require any complicated mixing methods.

Using a granular spreader makes the application simple. It is even possible to use it at lower concentrations, allowing users to treat only specific areas of a lawn or grass.

Propiconazole is a well-known DMI that can assist stop the formation of cell membranes, while azoxystrobin is a DMI that disrupts the normal breathing process of the fungus.

 

Read also: How To Use Headway G Fungicide

 

How To Use Strobe Pro G Fungicide

You are not permitted to use this product on turf that is being cultivated for the purpose of sale or other commercial usages as sod, for the generation of commercial seed, or for research purposes.

  • Measure the area that has to be treated in order to determine how much product you will require. To accomplish this, first, determine the length and width in feet, and then multiply those values together to arrive at the square feet total (length times width).
    Application rates are subject to change based on the condition being treated. The amount of product that will be applied will range from 2 to 5 pounds for every 1,000 square feet.
  • After determining how much of the product will be required to treat the disease and the region in question, measure out the required quantity and place it in the hopper of your calibrated spreader.
  • You should spread Strobe Pro G over your grass like fertilizer would. Evenly disperse the granules across the surface in order to provide good coverage that is uniform throughout.
    You don’t have to treat the entire lawn if there’s just one trouble location; you can make localized treatments there instead. After application, ensure that the treated area has at least half an inch of water applied to it.
  • In order to effectively combat turf diseases, subsequent sprays are often required. However, the time intervals between applications will change based on the ailment you are treating.
    Following the original application, you will typically submit a follow-up application anywhere between 14 and 28 days later.

 

Where Can I Apply Strobe Pro G Granular Fungicide?

  • Turf on golf courses
  • Lawns
  • Residential buildings
  • Institutional buildings
  • Public buildings
  • Commercial buildings
  • Industrial buildings
  • Parks
  • Recreational areas
  • Athletic fields

 

Read also: How To Use Heritage G Fungicide

 

What Are the Target Pests For Strobe Pro G Fungicide?

  • Anthracnose
  • Bentgrass Dead Spot
  • Brown Patch
  • Cool Weather Brown Patch
  • Dichondra Rust
  • Dollar Spot
  • Fairy Ring
  • Gray Leaf Spot
  • Gray Snow Mold
  • Rust
  • Leaf Spot
  • Melting Out
  • Microdochium Patch
  • Necrotic Ring Spot
  • Pink Patch
  • Pink Snow Mold
  • Powdery Mildew
  • Pythium Blight
  • Pythium Root Rot
  • Red Thread
  • Southern Blight
  • Spring Dead Spot
  • Summer Patch
  • Take-All Patch

 

Read also: How Pets are Transforming Education

 

Tip-off: What are the Do’s and Don’ts of the Strobe Pro Granular Fungicide?

  • You should not apply more than 19.2 pounds of product per one thousand square feet per calendar year.
  • Only apply by means of ground application.
  • Animals should not be allowed to graze on treated turf areas, and the clippings should not be fed to them.
  • When the weather circumstances are such that the product is more likely to blow from treated regions to nontarget aquatic habitats, the application should be avoided.
  • Under no circumstances should you apply more than three pounds of product per one thousand square feet of bermudagrass every thirty days.
    When temperatures are higher than ninety degrees, the use of Strobe Pro G should be avoided on bermudagrass golf course greens in Florida.
  • Do not utilize turf that is being produced for the purpose of selling or other commercial usages as sod, for the generation of commercial seed, or for the purposes of research.

It’s much simpler to avoid grass illness than it is to treat it. Use Strobe Pro G Fungicide as soon as possible after the onset of a disease or when the environment is favorable for the spread of the illness.

About The Author

Leave a feedback

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Discover more from Pestclue

Subscribe now to keep reading and get access to the full archive.

Continue reading