How To Use Optimate CS Insecticide

Why won’t you want to purchase the Optimate Insecticide from online pest control vendors? This insecticide has proven countless times to be one of the best insect killers, from ants to roaches, and even bedbugs.

This article is set to state the do’s and don’ts when using this insecticide and how to use it effectively.

 

What Is the Optimate CS Insecticide?

Insecticide CSI Optimate CS is a microencapsulated product that can be applied to and used around buildings and other man-made structures.

Gamma-Cyhalothrin is a single biologically active isomer that is new to the professional pest control industry and is proprietary to CSI Optimate CS. This isomer enables the same level of effectiveness to be achieved with only half the amount of Lambda-Cyhalothrin products being used.

1 fluid ounce of CSI When used as a treatment for litter beetles, Optimate CS can cover an area of up to 24,000 square feet.

Applications include filling the entire footing, crack and crevice work, as well as banded work. Darkling beetles, Hide beetles, and Carrion beetles can all be killed by this treatment, even while they are young.

 

Read also: How To Use Demand CS Insecticide

 

How To Use Optimate CS Insecticide

Now to the main course, we are here because we want to know how to use Demand CS:

• The first step in determining how much Optimate CS Insecticide you need to mix is to calculate the total square footage of the area that needs to be treated.
  You may determine this by measuring the length and width of the area and multiplying those two numbers together to get the square footage. Depending on the type of pest that needs to be treated, Optimate can be applied at a variety of various dilution ratios.
  A concentration of 0.0075% would be equal to 0.16 fluid ounces per gallon of water or 0.5 fluid ounces per three gallons of water. A concentration of 0.015 percent would be equal to 0.33 fluid ounces in one gallon of water, or between 1 and 2 fluid ounces in three gallons of water.
  A concentration of 0.03% is equal to 0.65 fluid ounces per one gallon of water or 2.0 fluid ounces per three gallons of water. All of these prices are for treating an area of one thousand square feet.
• You should only need to fill your sprayer up to the halfway point with the needed quantity of water. According to the results of your calculations, add the necessary measured amount of Optimate CS.
  The sprayer should then be shaken vigorously before being refilled with the remaining amount of water. Once everything is thoroughly combined, you can begin spraying it.
• Spray the insecticide Optimate CS into cracks and crevices, as well as use it as a barrier treatment along the outside perimeter of your property. If you want to maintain control over the pest you’re trying to get rid of, you should reapply Optimate CS every 21 days.

 

Where Can I Apply Optimate CS Insecticide?

• General Surface
• Crack & Crevice
• Apartments
• Factories
• Hospitals
• Hotels
• Kennels
• Livestock/Poultry Housing
• Nursing Homes
• Restaurants
• Schools
• Stores
• Warehouses
• Lawns
• Ornamental Shrubs
• Trees

 

Read also: How to Use Nanotek Surfactant

 

What Are the Target Pests For Optimate CS Insecticide?

• Ants
• Bedbugs
• Bees
• Boxelder Bugs
• Carpenter Bees
• Carpet Beetles
• Centipedes
• Cigarette Beetles
• Clover Mites
• Cockroaches
• Confused Flour Beetles
• Crickets
• Earwigs
• Firebrats
• Fleas
• Flies
• Lesser Grain Borers
• Litter beetles
• Millipedes
• Mosquitoes
• Pillbugs
• Red Flour Beetles
• Rice Weevils
• Saw-toothed Grain Beetles
• Scorpions
• Silverfish
• Sowbugs
• Spiders
• Spider Mites
• Termites
• Ticks
• Wasps

 

Read also: How To Use EcoVia WD

 

Tip-off: What are the Do’s and Don’ts of Optimate CS?

• Remove any food and cooking equipment that could potentially come into contact with the treatment, cover all surfaces that could come into contact with food, and either wash completely after treatment and before using. Avoid Contact with All Edible Crops.
• For perimeter treatments, apply a continuous band of insecticide around the building foundations as well as around windows, doors, service line entrances, eaves, vents, and other spots. This will decrease the likelihood that crawling pests will be able to gain access to the building.
• Before applying the treatment, clear away any debris or leaf litter that may be next to the foundation, trim back any vegetation or branches that come in contact with the foundation, and reposition or rake back any rocks, deep mulch, or other potential pest harborages that may be next to the foundation.
• The band should be applied around the structure at a width of up to 10 feet (or according to the state requirements that govern commercial pest control) and should be extended upward along the foundation to a height of 3 feet, as well as around windows, doors, and roof overhangs.
• In order for the pesticide to reach the soil or thatch level where pests may be active, it should be used as a coarse spray and applied to fully and uniformly wet the foundation and/or band area.

About The Author